PE series jaw crusher
Product Introduction:
PE series crusher is mainly used for medium-size crushing of various ores and large materials, widely used in mining, metallurgy, строительные материалы, road, railway, water conservancy and chemical industry. The maximum compressive strength of the crushed material is 320Mpa. Характеристики производительности: large crushing ratio, uniform product particle size, simple structure, reliable work, easy maintenance, low operating costs.
How it works:
The machine is driven by the motor belt and pulley, through the eccentric shaft to make the moving jaw up and down, when the moving jaw down, the Angle between the fixed jaw and the moving jaw becomes smaller, the material is crushed to achieve the purpose of crushing; When the moving jaw rises, the Angle between the fixed jaw and the moving jaw becomes larger, the moving jaw plate leaves the fixed jaw plate under the action of the pull rod and the spring, and the broken material is discharged from the lower mouth of the crushing chamber.
Характеристики производительности:
◆ Deep cavity crushing, efficient and energy saving
Optimized deep cavity crushing, no dead zone, feed and crushing efficiency greatly improved, single energy saving 15%-30%, system energy saving more than double.
◆ Strong bearing capacity, high stability
Larger forged processing heavy eccentric shaft, high manganese steel jaw plate and high cast steel moving jaw assembly, equipment bearing capacity is stronger, higher stability.
◆ Advanced technology, long service life
Drawing on the world’s advanced manufacturing process, the digital analysis of the operation of each person before and after, the internal structure is precise, and the service life of the equipment is greatly extended.
◆ Centralized lubrication system, easy maintenance
The unique design of the centralized lubrication system, parts lubrication faster, less maintenance workload.
◆ Simple structure, easy maintenance
Under the basic principle of tilting, the redundant parts are simplified, the overall structure of the equipment is simple and efficient, the crushing capacity is strong, the operation and maintenance are convenient, and the operating costs are low.
◆ Large discharge adjustment range, a multi-purpose machine
Gasket type discharge adjustment device, large discharge adjustment range, increase the flexibility of equipment use, can meet a variety of customer processing requirements.
◆ Low noise, less dust
Equipment reference to national environmental standards, тихий шум, supporting equipment dust removal, the construction environment is fully in line with environmental requirements.
Main technical parameters
Type inlet size (мм) largest feed particle size (мм) discharging mouth adjusting range (мм) емкость (т/ч) eccentric shaft speed (об/мин) motor power (kw) of the total weight (т) размеры
(Length × width × height)
ЧП – 150 x 250 x 250 150 125 10-40 1-3 250 5.5 0.8 720 x 660 x 850
ЧП – 200 x 300 x 300 200 180 15 to 50 2-6 260 7.5 1.2 910 x 750 x 990
PE-200×350 200×350 180 18-70 3-10 260 11 1.5 1000×870×990
PE-250×400 250×400 210 20-60 5-20 300 15 2.8 1300×1090×1270
PE-400×600 400×600 340 40-100 16-60 275 30 7 1730×1730×1630
PE-500×750 500×750 425 50-100 40-110 275 55 12 1980×2080×1870
